ENMX High Feed Milling Insert YG-1

Name: ENMX High Feed Milling Insert YG-1
Rating: 5.00 (1 reviews)

Rated 5.00 out of 5 based on 1 customer rating

Application :

High feed milling, profiling, face milling, ramping,
plunging, helical interpolation

Features :

• Cutter Diameter range : 16~125mm (.625″~6″)
• Double-sided insert with 4 corners
• Wide flank face with reinforced insert shape
• Positive rake angle & Small entering angle

Designation		Grade	EDP no	Material			Fz (mm/tooth)
ENMX General	ENMX 0604	YG012	12000734	P20	H20		0.3 ~ 2.0
		YG602	12000474	P30	M30
		YG613	12000606	P40	M40	S40
	ENMX 0905	YG012	12000736	P20	H20		0.3 ~ 2.5
		YG602	12000702	P30	M30
		YG613	12000703	P40	M40	S40
-ST Stainless	ENMX 0604 – ST	YG602	12000623	P30	M30		0.1 ~ 0.8
	ENMX 0604 – ST	YG613	12000625	P40	M40	S40	0.1 ~ 0.8
	ENMX 0905 – ST	YG602	12000705	P30	M30		0.2 ~ 1.2
	ENMX 0905 – ST	YG613	12000706	P40	M40	S40	0.2 ~ 1.2
-TR Hardened Steel	ENMX 0604 – TR	YG012	12000733	P20	H20		0.3 ~ 2.5
		YG712	12000504	P15
		YG602	12000459	P30	M30
	ENMX 0905 – TR	YG012	12000735	P20	H20		0.3 ~ 3.0
	ENMX 0905 – TR	YG602	12000600	P30	M30		0.3 ~ 3.0